| . |
(click image for large view)
 Sold in pairs or singles.
Semi-gloss powder-coated finish.
4 Ton working load.
Use on front or rear bumpers.
3" X 2" bolt pattern.
4" X 3" outer dimensions.
Includes 1/2" Grade 8 hardware.
3/4" powder-coated D-shackles.
 Backing Plates.
Ready-to-be-painted finish.
1/4" thick steel.
Use on front or rear bumpers.
3" X 2" bolt pattern.
1/4" wider than shackle mount.
|
. |
|
XD Bumper Shackle Mounts w/ Plates & D-Shackles
|
Our Xtreme-duty bumper shackle mounts fit
every make of off-road bumper including brand-name bumpers (ARB, TJM), and custom-made bumpers.
Without question, the strongest bolt-on recovery point you can buy.
And for bumpers thinner than 3/16" steel, we recommend using our backing plate, which is 1/4" larger than the dimensions of
the shackle mount. The plate has the same bolt pattern, and mounts behind the off-road bumper when bolting on the shackle
mount.
 The recommended solution for vehicles without
bumper-integrated recovery points, or solid frame-mounted recovery points (Factory tie-downs are
not recovery points).
Grade 8 mounting hardware included. |
. |
| . |
|
U.S. SHIPMENTS (CONTINENTAL U.S. ONLY) |
XD Shackle Mounts w/ Plates & Shackles (pair)
Shipping |
. |
$124.95
$25.00 * |
. |
. |
|
U.S. SHIPMENTS (CONTINENTAL U.S. ONLY) |
XD Shackle Mounts w/ Plates & Shackles (single)
Shipping |
. |
$68.95
$15.00 * |
. |
. |
|
* Includes sales tax for shipments within Oklahoma |
. |
Notes:
Use only on a well-made steel bumper.
For bumpers thinner than 3/16" steel, we recommend using a backing plate slightly larger than the dimensions
of the shackle mount behind the off-road bumper when bolting on the shackle mount. See our
backing plates link. |
|
. |
. |
| . |
| . |
Steel Receiver Bracket
Xtreme-duty machined steel bracket with 3/4" D-ring, and will fit any 2" receiver. Cold galvanizing
compound finish. |
. |
2" Shackle Bracket
Our heat treated T6061 billet aluminum bracket includes 5/8" or 3/4" D-ring, and will fit any 2"
receiver. |
. |
Steel Receiver Bracket
Heavy-duty cast steel bracket with 3/4" D-ring, and will fit any 2" receiver. Zinc-plated or Black powdercoated finish. |
. |
| . |
Dealers Welcome
We are exclusive distributors for many of our listed products. We offer volume discounts, or
drop-ship set-ups to retailers of 4x4 accessories and recovery gear.
|
Disclaimer. Please read:
The effectiveness of this equipment is directly related to the manner in which it is installed,
used, and/or maintained. Proper installation, use and maintenance is solely the responsibility of
the installer/user, and will not be assumed by OKoffroad.com.
|
. |
. |
|
