| . |
(click image for large view)
 Sold in pairs or singles.
Zinc-plated finish.
3 Ton working load.
Use on front or rear bumpers.
3" X 2" bolt pattern.
4" X 3" outer dimensions.
Includes Grade 8 hardware.
Accepts our 3/4" D-shackles.
D-shackles sold separately.
Ideal for use with a recovery bridle.
Note: Use only on a well-made
steel bumper.
(click image for large view) |
. |
Our Heavy-duty bumper shackle mounts fit
every make of off-road bumper including brand-name bumpers (ARB, TJM), and custom-made bumpers.
Without question, the strongest add-on recovery point you can buy.
 The recommended solution for vehicles without
bumper-integrated recovery points, or solid frame-mounted recovery points (Factory tie-downs are
not recovery points).
Grade 8 mounting hardware included. |
. |
| . |
|
U.S. SHIPMENTS (CONTINENTAL U.S. ONLY) |
HD Shackle Mounts (pair)
Shipping |
. |
$74.95
$12.50 * |
. |
. |
|
U.S. SHIPMENTS (CONTINENTAL U.S. ONLY) |
HD Shackle Mounts (single)
Shipping |
. |
$39.95
$10.00 * |
. |
. |
|
* Includes sales tax for shipments within Oklahoma |
. |
Note: For bumpers
thinner than 3/16" steel, we recommend using a backing plate slightly larger than the dimensions
of the shackle mount behind the off-road bumper when bolting on the shackle mount. See our backing
plates below. |
|
. |
. |
| . |
(click image for large view)
|
. |
. |
| . |
(click image for large view)
Sold in pairs or singles.
Ready-to-be-painted finish.
1/4" thick steel.
Use on front or rear bumpers.
3" X 2" bolt pattern.
1/4" wider than shackle mount.
Accepts our Bumper Shackle Mounts.
Note: Use only on a well-made
steel bumper. |
. |
For bumpers thinner than 3/16" steel, we
recommend using our backing plate, which is 1/4" larger than the dimensions of the shackle mount.
The plate has the same bolt pattern, and mounts behind the off-road bumper when bolting on the
shackle mount.
The plates are shipped ready to be painted. Here it is
pictured with grey primer. |
. |
| . |
|
U.S. SHIPMENTS (CONTINENTAL U.S. ONLY) |
Backing Plates (pair)
Shipping |
. |
$19.95
$12.00 * |
. |
. |
|
U.S. SHIPMENTS (CONTINENTAL U.S. ONLY) |
Backing Plate (single)
Shipping |
. |
$12.00
$10.00 * |
. |
. |
|
* Includes sales tax for shipments within Oklahoma |
. |
|
|
. |
. |
| . |
(click image for large view)
Note: Use only on a well-made
steel bumper. |
. |
|
HD Shackle Mounts with
Backing Plates
|
|
See descriptions of our Bumper Shackle
Mounts and Backing Plates in the sections above. |
. |
| . |
|
U.S. SHIPMENTS (CONTINENTAL U.S. ONLY) |
HD Shackle Mounts w/ Backing Plates (pair)
Shipping |
. |
$85.95
$19.00 * |
. |
|
U.S. SHIPMENTS (CONTINENTAL U.S. ONLY) |
HD Shackle Mounts w/ Backing Plates (single)
Shipping |
. |
$47.95
$12.50 * |
. |
|
* Includes sales tax for shipments within Oklahoma |
. |
|
|
. |
. |
| . |
XD Shackle Mounts
Mount D-shackles to your bumper for a rock-solid recovery point. Mounts to any steel bumper. |
. |
Grade 8 Hardware
Grade 8 hardware, best suited for applications where high strength and hardness is required, like
on your truck. |
. |
4x4 D-Ring Shackles
3/4" screw pin anchor shackles fit our bumper shackle mounts. U.S. and import equally rated. All
sizes available. |
. |
|
. |
. |
| . |
| . |
Re-Sellers Welcome
We are exclusive distributors for many of our listed products. We offer volume discounts, or
drop-ship set-ups to retailers of 4x4 accessories and recovery gear.
|
Disclaimer. Please read:
The effectiveness of this equipment is directly related to the manner in which it is installed,
used, and/or maintained. Proper installation, use and maintenance is solely the responsibility of
the installer/user, and will not be assumed by OKoffroad.com.
|
. |
. |
|
