Recovery Gear at OKoffroad.com
.

(click image for large view)
.
Screw Pin Anchor Shackle (Crosby)

The D-Ring Shackle is used for so many recovery situations. It is a must to have a set of quality Crosby McKissick D-ring shackles with adequate load rating, when venturing offroad.

Working Load Limit permanently shown on every shackle.
Forged - Quenched and Tempered, with alloy pin.
Rust resistant EPOXY finish.
Made in the U.S.A.
Need something bigger?
>> Mega D-Shackles <<
For Recovery above & beyond!
.


Note: Never use shackles with less than 5/8" pin diameter.
. .

1/2" Shackle
4,000 lb Working Load Limit
20,000 lb Ultimate Strength
5/8" Pin Diameter
.
5/8" Shackle
6,500 lb Working Load Limit
32,500 lb Ultimate Strength
3/4" Pin Diameter
.
3/4" Shackle
9,500 lb Working Load Limit
47,500 lb Ultimate Strength
7/8" Pin Diameter
.
7/8" Shackle
13,000 lb Working Load Limit
65,000 lb Ultimate Strength
1" Pin Diameter

. .
.
U.S. SHIPMENTS (CONTINENTAL U.S. ONLY)
Size
Crosby D-Ring Shackle
Shipping
. 1/2" (single)
$19.50
$10.00 *
. 5/8" (single)
$29.95
$10.00 *
. 3/4" (single)
$39.95
$10.00 *
. 7/8" (single)
$49.95
$10.00 *
.

Total . $29.50 . $39.95 . $49.95 . $59.95 .

U.S. SHIPMENTS (CONTINENTAL U.S. ONLY)
Size
D-Ring Shackle
Shipping
. 1/2" (pair)
$34.50
$15.00 *
. 5/8" (pair)
$54.95
$15.00 *
. 3/4" (pair)
$74.95
$15.00 *
. 7/8" (pair)
$89.95
$15.00 *
.

Total . $49.50 . $69.95 . $89.95 . $104.95 .

* includes sales tax for Oklahoma shipments

.
.
. .
.

.
Customer Service Tip
The question we get asked most frequently - What size D-shackle will fit my vehicle's bumper recovery points/mounts?

Our 3/4" D-shackles with 7/8" pin is considered a standard 4x4 D-shackle size. Most factory and aftermarket bumper recovery points are sized to fit this D-shackle.

.
. .
.
. .
.

(click image for large view)

Note:
Never use shackles with less than 5/8" pin diameter.
.
Screw Pin Anchor Shackle (Galvanized)

Our galvanized D-Ring Shackle is hot-dipped galvanized, with working load limits equal to our Crosby shackles (scroll-up).

Working Load Limit stamped on every shackle.
Forged - Quenched and Tempered, with alloy pin.
Rust resistant ZINC-PLATED finish.
.

3/4" Shackle
9,500 lb Working Load Limit
47,500 lb Ultimate Strength
7/8" Pin Diameter
.
7/8" Shackle
13,000 lb Working Load Limit
65,000 lb Ultimate Strength
1" Pin Diameter
. .
.
U.S. SHIPMENTS (CONTINENTAL U.S. ONLY)
Size
Galvanized D-Ring Shackle
Shipping
. 3/4" (single)
$14.95
$6.00 *
. 7/8" (single)
$22.95
$6.00 *
. 3/4" (pair)
$25.95
$12.00 *
. 7/8" (pair)
$39.95
$12.00 *
.

Total . $20.95 . $28.95 . $37.95 . $51.95 .


* includes sales tax for Oklahoma shipments

.
.
. .

.

Old Glory Shackles

Quality Patriot Red, White & Old Glory Blue powdercoated finish. Get the set of three.
.

XD Shackle Mounts

Mount D-shackles to your bumper for a rock-solid recovery point. Mounts to any steel bumper.
.

VanBeest Shackles

VanBeest Green Pin hot-dipped galvanized D-Ring Shackles are the most well-known D-shackles in the 4x4 world.
.

.

Mega D-Ring Shackles

Our Mega D-Ring Shackles are for large vehicle recovery. U.S. and import - all sizes.
.

Powdercoated Shackles

Our 3/4" D-shackles with a quality OD Green, Black, Yellow or Patriot Red, White & Blue powdercoating.
.

Stainless Steel Shackles

Stainless steel 3/4" D-shackles. Grade # 304 & 316. They look good and they work tough!
.

. .
.
.
Dealers Welcome
We are exclusive distributors for many of our listed products. We offer volume discounts, or drop-ship set-ups to retailers of 4x4 accessories and recovery gear.



Disclaimer. Please read: The effectiveness of this equipment is directly related to the manner in which it is installed, used, and/or maintained. Proper installation, use and maintenance is solely the responsibility of the installer/user, and will not be assumed by OKoffroad.com.


. .
.

From Austin TX, Mike Sasser's FJ w/ Xd Shackle Mounts, Crosby Shackles, & SP Fairlead


. .
OKOffroad