Recovery Gear at OKoffroad.com

The Xtreme Hi-Lift® Jack



The Hi-Lift® X-TREME is for the serious Hi-Lift® user, offering the "top of the line" all-cast version (48" or 60" sizes) with special features that include, charcoal metallic powder-coat finish, gold zinc-coated hardware and handle, with a special top winch-clamp-spreader attachment.

SPECIFICATIONS:
Safety bolt is designed to shear at 7,000 lbs.
4 1/2" lifting nose for positive contact with load.
Steel bar can be reversed for extra long life.
Low pickup of 4-1/2".
28 square inch base plate.
Quick release pin for easy removal of base
5,000 lbs rated capacity.

FEATURES:
Charcoal Metallic Powder-Coat Finish provides a truly unique look that separates it from the standard Hi-Lift.
Gold Zinc-Coat Hardware ensures the greatest rust resistance from extreme use for all the hardware, the unique winch-clamp-spreader attachment, and the handle.
Unique Winch-Clamp-Spreader Attachment replaces the clamp-clevis of the standard Hi-Lift®.

Winch-Clamp-Spreader Specs:
Winch, clamp, or spread up to 5,000 lbs.
7/8" shackle holes for easy/secure, non-binding shackle attachment.
3/8" chain slot for easy/secure winching & quick slack adjustment. No hook required.
Attachable at any point on the Hi-Lift "I" beam. Quick tightening wing nut. Cut-out wedge for "gripping" when spreading.
U.S. SHIPMENTS - LOWER 48




Customer Service
"Here's some pix of me jacking up the LR4 on the nifty frame slider/nerf bars with the XTREME Hi-Lift Jack you sent me."

Joseph G
"Off-roading somewhere in North Africa..."






The Original Hi-Lift® Jack



The Hi-Lift® Jack is a rugged, highly versatile jack that puts you in command of situations requiring lifting, pushing, pulling, winching, and clamping. Although light in weight and easy to maneuver, the Hi-Lift® Jack offers a rated lifting capacity of 2-1/3 tons.

SPECIFICATIONS:
Approximate weight: 30lbs.
4,660 lbs rated capacity.
Climbing pins of specially processed steel with 125,000 PSI tensile strength and 100,000 PSI yield.
Steel bar is manufactured of specially rolled extra high carbon steel with 80,000 pound minimum tensile & carbon .69 to .82.
Steel handle of 14 gauge high-yield structural tubing with minimum yield of 55,000 PSI. 1 5/16" diameter.

FEATURES:
Every Jack comes complete with an adjustable top clam clevis for use in clamping and winching.
Safety bolt is designed to shear at 7,000 lbs.
For speedy disengaging, lifting unity automatically drops away when load is removed.
4-1/2" long lifting nose for positive contact with load.
Steel bar can be reversed for extra long life.
Low pickup of 4-1/2".
28" square in base plate.

60" Black: Cast & stamped steel construction. 7000lb tested capacity.

60" Red: All cast construction. 7000lb tested capacity.

48" Red: All cast construction. 7000lb tested capacity.
U.S. SHIPMENTS - LOWER 48