| . |
(click image for large view)
 SD, HD model: 175 Amp continuous.
XD model: 300 Amp continuous.
SD, HD model: 6-36 Volt range, 1K peak.
XD model: 6-36 Volt range, 2K peak.
SD: 2-Pole connectors.
HD & XD: 4-Pole connectors.
4-Pole switch w/ alternator connectors.
12 & 24 volt vehicle compatible.
Prevents battery drain.
3/4" Center hole for switch mounting.
Switch panel dimensions: 23/4" x 23/4".
Note: We recommend the XD model for set-ups with on-board welders etc. |
. |
|
SD, HD & XD Battery Disconnect Switch
|
Direct from the racing world, and now
required for any type of competitive off-roading, the battery disconnect switch has a bright
red handle and clearly labeled mounting panel - easier to find in an emergency. This is for the
serious off-roader with a properly set-up vehicle. The battery disconnect switch also has other
uses - prevents battery drain.
The SD & HD models have a 175 Amp continuous rating, 6-36 Volt range, 1000 peak.
The XD model is rated for 300 Amp continuous, 6-36 Volt range, 2000 peak. All switches can be
used for 12 volt vehicles and 24 volt ex-military HumVees, Uni-mogs, etc. |
. |
| . |
|
U.S. SHIPMENTS (CONTINENTAL U.S. ONLY) |
Model
Disconnect Switch
Shipping |
. |
SD (2-Pole)
$34.95
$10.00 * |
. |
HD (4-Pole)
$39.95
$10.00 * |
. |
XD (4-Pole)
$59.95
$10.00 * |
. |
|
Total |
. |
$44.95 |
. |
$49.95 |
. |
$69.95 |
. |
|
* Includes sales tax for shipments within Oklahoma |
. |
|
|
. |
. |
| . |
Winch Safety Switch
Shuts off power to winch. In-cab or under-hood mount. Applications for 12 and 24 volt winches. |
. |
24-12 Volt Converters
Now you can run a 12 volt radio, CB radio,
auxiliary lights or any other 12 volt unit from your 24 volt truck. 10 and 25 amp units
available. |
. |
Battery Isolator Kit
Handles alternators up to 95 amps. Complete kit with mounting hardware and wiring. Charges one or
both batteries. |
. |
|
. |
. |
| . |
Disclaimer. Please read:
The effectiveness of this equipment is directly related to the manner in which it is installed,
used, and/or maintained. Proper installation, use and maintenance is solely the responsibility of
the installer/user, and will not be assumed by OKoffroad.com.
|
. |
. |
|
